Vaping is meant to taste miles better than smoking analog cigarettes, but some users many feel that the vape burns there throat on inhale or exhale. The cause to this can either be a burned old coil in the vape tank that needs changing or the nicotine strength in the eliquid is too high for your liking. If you have a powerful vape setup that blows clouds, vaping around 60 watts or above then you should be using e liquid with 3 mg nicotine. The amount of watts for a higher nicotine eliquid should not be set too high no more than 40 watts for 6 MG. If you want to experience less of a throat hit on your ecig, simply turn down the wattage and stop were the vaping becomes less intensive on your throat.
If its not the eliquid, its the burned coil that
is causing the burnt harsh taste on your throat. This is also not healthy for
you because you are breathing in burned cotton into your system. A coil can
taste this way by not being primed probably when first used or is not regularly
topped up with eliquid. If you need to change the coil follow the instructions
below as the procedure for doing so is relatively the same.
1) Remove the glass tank from the base by
twisting it anti clockwise.
2) The coil will be placed in the base.
3) To remove it simply twist it off and it will
come apart.
4) Insert your new coil and twist it in clockwise
to secure it in.
5) Since its a brand new coil that you have
inserted into your ecig tank, you will need to prime it by pouring drops of
eliquid onto the side holes and in the middle. This will allow the cotton
inside to be soaked up prevent it tasting burned when vaping on your new coil
for hte first time.
6) Once you have primed the coil, place the tank
back together and fill it up with eliquid. Allow it to sit for 15 minutes. Also
close the air holes and suck on the tip 3-5 times to force the eliquid to go
into the coils.
0 comments:
Post a Comment