The check battery error that you get on the
screen of either a Wismec RX2/3 or RX200 is a common problem across many
forums. I want to lay out the confusion so you know exactly why this problem is
occurring with your ecig vape pen. The reason why this can occur is because of
the batteries not making proper contact with the mod. The first thing to do
before looking into this further is ensure that all each individual 18650
battery is fully charged up. Once you have confirmed the voltages of the
batteries and they are charged, you can now proceed with the following fix.
There is a small screw located behind some piece of foam near the negative
terminal. Chances are this is probably loose and is causing problems with the
ecig
vape pen to pick up the three 18650 batteries that you insert into the
mod.
|
Screw location which you need to find and tighten. You might want to zoom in if required. |
1) Remove the rear battery cover of your Wismec
RX200 or RX2/3 mod.
2) Remove the three 18650 batteries if already
inserted into the ecig vape pen.
3) Now that you have done that, get a small
Philips head screwdriver and tighten the small screw next the foam piece on the
mod. While you are at it, tighten all the other screws as well to ensure that
all screws a secured down properly.
So thats all there is to fixing your Wismec RX200
mod that has a check battery issue. Its either the batteries are not charged or
have gone bad, if not that them the loose screw usually fixes this problem. If
you are still getting the check
battery issue on your Wismec ecig mod, then its
probably a defect unit and needs replacing.
Welcome to my ECIG VAPING blog. I have been a long-term smoker that has switched to vaping for more than three years and still going strong. I have been vaping for a long time and worked in many vaping retail stores. I have built up knowledge and real life experiences with vaping products that I share on my website as a passion. So don’t miss out, follow and like my Facebook page for instant updates about vaping.
0 comments:
Post a Comment